Meatsmoker
New member
- Joined
- Aug 6, 2021
- Messages
- 4
- Reaction score
- 1
Can anyone post pics of using 5 gal buckets hooked to 1/2” pvc? Every sealant I try has leaked so far, not sure what fittings are best to use....
Can anyone post pics of using 5 gal buckets hooked to 1/2” pvc? Every sealant I try has leaked so far, not sure what fittings are best to use....
Here are pics of my system internal and external I used O rings on my system, I have two different systems this one is ten gallons and used Electrical fitting Myers hub, Other system I used plastic 1/2 inch electrical nut on a male to female adapter with o ring on outside. You can get bulkhead fittings on Amazon or most hardware storesCan anyone post pics of using 5 gal buckets hooked to 1/2” pvc? Every sealant I try has leaked so far, not sure what fittings are best to use....
Thanks for that link, the system I am envisioning will likely be low pressure. All the nipples I find on amazon require pressure to keep from leaking. Do you know what the max pressure is for the DD valve? I saw on the Bass website at least one valve that was listed for on 1-5 PSI. I don't want to add expense by putting a regulator in the system.Bass Equipment have some nice brass water nipples for rabbits. WATER VALVE We use those valves which thread into a standard 1/2" PVC fitting. It's 1/2" PVC with a 1/8" tee off the side.
Pump runs on 12V so very little power consumption.
Enter your email address to join: