Not new, but returning!

Rabbit Talk  Forum

Help Support Rabbit Talk Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
🤬😵‍💫😭🤬
So tiring trying to use ground anchors. They're all a b*tch and honestly, impossible for me to get right. Idk why nor do I care.
I'm going back to what I always end up using, tposts. Just gotta buy 6 more, found 2 and there's 2 more I can pull up and reuse. Will put one for every single leg. They'll go on the inside so not to be in the way of the walls.
20241029_143620.jpg20241029_143814.jpg

Gotta go up another block to be level broadside....Do I really want to bother...Maybe I'll shovel out the other side instead...ugh.
20241029_123758.jpg

20×36ft? Tposts keeping it from flying away. Other carports, tposts. Temp shelters, tposts. Shade tarps, tposts. Idk, they seem to work and boy are they easy to get in!
20241029_150224.jpg
 
😵‍💫 Va weather is absurd. Freezing at night, 80s and no clouds during the day. 😵‍💫
20241030_132017.jpg
That...uh, is it too high on that side now?? 🤦🏽‍♀️
20241030_132609.jpg
Half of the tposts are in! One cable attached.
20241030_142507.jpg
I realized that i need to cut these trees back. Gotta do that before the roof goes on...
20241030_132842.jpg
And the indoor raining all carports do....I wonder if there's diy spray insulation??
20241030_093121.jpg20241030_093110.jpg
 
Put them in even deeper after the pic, 5ft posts, 3ft in ground.
20241030_170346.jpg
Lost that rod...and now i remember what happened to the last one. The crap metal the duckbill is made of fails and the rod goes through it, getting stuck. 🙄
20241030_171226.jpg
Nice n deep! Need a bit more cable to finish securing it.
20241030_173646.jpg20241030_174143.jpg
Got a panel up. Realized that I need to do some shimming....
20241030_182009.jpg20241030_182010.jpg
Oh, and cut those trees tomorrow!
20241030_183225.jpg


Did I mention that I'm afraid of heights? 😵‍💫🫠 Yeah..............
 
Almost done with the metal! One wall left. Then I'll start the diy walls/doors.
I knew the tree would hit the building, an impossible drop with the frame already up. 🫣 But no damage, so we're good.
20241101_131102.jpg20241101_131746.jpg20241101_135403.jpg20241101_141027.jpg20241102_165938.jpg20241102_170403.jpg20241102_170636.jpg

Dug up my scavenged plywood, wood and composite decking. Hope to be able to buy as little as possible.
20241102_124754.jpg20241102_125155.jpg20241102_125143.jpg
 
Metal is done! 😵
Have enough left over to give the 2nd building 1/3 metal walls.
20241103_131917.jpg

I'll use the bottom grey panels to close off that low end at some point.
Thinking of using metal cable in an X to brace the ends. It wobbles and that bothers me.
20241103_131608.jpg20241103_132423.jpg20241103_133644.jpg

Blocked off bc sheep are disgusting and destructive.
20241103_133659.jpg
 
Cleaned out the outdoor growout pen, filled 9 bags!
20241107_105357.jpg20241107_113823.jpg20241107_114749.jpg

And first timer Gilt had her kits! 7 kit, sire Rivian. Nothing better than an excellent first time momma!
Screenshot_20241107_123707_Gallery.jpgScreenshot_20241107_123719_Gallery.jpgScreenshot_20241107_123732_Gallery.jpgScreenshot_20241107_123827_Gallery.jpgScreenshot_20241107_123839_Gallery.jpg


Cruella kits
Screenshot_20241107_123442_Gallery.jpg
 
And this guy was born. They'll be in the incomplete rabbit building until I feel he's strong enough to be out permanently without being locked up at night or on rainy days.
Still working on the structure, so hopefully it'll be done when he's moved out.
20241106_144944(0).jpg20241104_140619(0).jpg
 
Kicked the kits out, but put their nest bottoms in.
Then Quincy got her nest. 3 Rex does got bred, G was not in the mood. Ugh. So, mutt kits again...
20241108_100526.jpg20241108_100617.jpg20241108_100644.jpg
 
Another update on that cruddy ped sf doe. Flyback fur. 😑
One of their main breed characteristics, missing. 🤦🏽‍♀️
 
Well, that was it. A furry lost single. Goliath was super willing and so was she, so hoping for more and live kits next time.

Got new metal pails and spray paint for them. Hopefully that'll make them last longer than a year.
 
Back
Top