Old but new

Rabbit Talk  Forum

Help Support Rabbit Talk Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 31, 2024
Messages
7
Reaction score
22
Location
McEwen, Tennessee
Hello, fellow rabbit enthusiasts. I am an old guy whose parents raised rabbits when I was a boy. In fact, many of my "play" shirts were made from rabbit feed sacks. That was 70 years ago. Around 40 years ago I facilitated raising pet rabbits by my children. Now I want to raise meat rabbits as a back up to the meat supply chain. I am looking for either New Zealand or Californian breeders. I have a few contacts that I will visit soon that are fairly close by. If you have breeders or good looking kits and you are near Dickson, Tennessee I would love to hear from you. Right now I am busy building cages, etc. to house my bunnies. I will say that I have perused some of the forums and have already learned some great information. Really glad to be here.
 
Welcome :)

I started raising meat rabbits when I was about 40, just needed something to care for, and there are similiar childhood memories of my grandfather raising rabbits - well, back then in that area every second house had chickens or rabbits.

When you build your cages, make them easy to access and clean, do some research and keep it simple it pays off - I'm on my 3rd iteration of wooden rabbit hutches :D, next project after the carport will be replacing the 1st and 2nd generation hutches.
 
Hello, fellow rabbit enthusiasts. I am an old guy whose parents raised rabbits when I was a boy. In fact, many of my "play" shirts were made from rabbit feed sacks. That was 70 years ago. Around 40 years ago I facilitated raising pet rabbits by my children. Now I want to raise meat rabbits as a back up to the meat supply chain. I am looking for either New Zealand or Californian breeders. I have a few contacts that I will visit soon that are fairly close by. If you have breeders or good looking kits and you are near Dickson, Tennessee I would love to hear from you. Right now I am busy building cages, etc. to house my bunnies. I will say that I have perused some of the forums and have already learned some great information. Really glad to be here.
Welcome fellow Tennessean! I'm new to raising rabbits this year at 50 years old and went from 0 to 100 in what feels like overnight. I also wanted to have my own source of meat and meat that was free of all the antibiotics and now MRNA vaccines amongst God only knows what else our food supply is adulterated with these days. This site and great members have helped me tremendously in being successful. I haven't posted a lot but this is my first go-to when I have questions and I can usually just search the forum and find what I need.

I can't help you on your search for Californians or New Zealands as I only raise Silver Fox but you could try looking up breeders on the ARBA website as well as the breeds national group sites.

Best of luck!
 
Thank you for the welcoming messages. I have been able to find some suppliers of New Zealand rabbits in the area. Surprisingly the most promising one I found was on Craigs List. I have already enjoyed reading several posts and have learned some great tips. This really is a great forum and I will be returning often.
 
Thank you for the welcoming messages. I have been able to find some suppliers of New Zealand rabbits in the area. Surprisingly the most promising one I found was on Craigs List.
Welcome to the forum! I raise New Zealand and Rex in Montana. I prefer the New Zealands though as a meat rabbit. In my area I sell more Rex as pets.
 
Hi, I have been breeding both Californian and New Zealand rabbits for meat for the past 2 years. Originally we bought metal rabbit runs with hutches for each of our rabbits, but then we were given a food grade IBC tote. I looked at the thing and started plotting what I could do with it. Being an Art Teacher, I plan in my head, which sometimes baffles my husband. So I said to old faithful,"Dear we are going to turn it upside down after we cut a very big square hole in the top and a smaller square hole on a side." He looked bewildered but got his jigsaw and accomplished the task.
I then showed him the 1cm metal mesh I had picked up and we cut it a bit bigger than the top hole which is now the bottom hole. Old faithful then crawled through the smaller hole and fixed the wire inside with little bolts and washers. He then drilled a lot of holes in the plastic edging, mixed some concrete and made a slope on the inside edges so the bolts were covered and the concrete edging would give the rabbits a resting spot all the way around so as not to hurt their paws. The slight slope meant all faeces rolled down to the wire and dropped through the bottom into the kiddies swimming pool. We then suspended the IBC this way up ( upside down ) on chains to the rafters of the shed, coveniently hanging it at waist height. To keep mossies and flies off my rabbits, therefore diseases , I employed a mosquito net with a heavy plastic kiddies pool placed inside it to catch the faeces. The net is then pulled up over the bottom of the IBC and secured with pegs onto the metal frame. Oh yes, I forgot the door. It was made with smaller gauge wire so the rabbits cannot chew the netting. Also we drilled a load of ventilation holes in the sides, below net level and a few on top which were covered with metal fly mesh glue gunned on.
This crate has been the best cage ever. I just use the guerney to clean it1. It can hold up to 15 rabbits if you are pushed for space but I usually fatten 6-8 kits in it from 5 weeks to 20 weeks. We like the older rabbits as we have a big family and need an over 2kg rabbit to feed us all. We now have 2 IBC cages, one for the female kits and 1 for tbe males. Overall cost if buying a 2nd hand FOOD GRADE IBC c. $100-$120
Bolts and bag of concrete mix. $30
Wire mesh c.$15
Mossie net $15
Baby swim pool $15

So for under $200 AU
You have a 125cm x 125cm cage that protects your rabbits from all diseases and makes their faeces very easy to maintain. Also relatively indestructable. When the mesh dies a new piece can be bolted on the bottom.
 
Thank you for the welcoming messages. I have been able to find some suppliers of New Zealand rabbits in the area. Surprisingly the most promising one I found was on Craigs List. I have already enjoyed reading several posts and have learned some great tips. This really is a great forum and I will be returning often.
Welcome! I have had fantastic luck with craigslist in my area. I am a fan!
 
Aloha Haven Farm,

Sounds like you're off to a good start!

Having someone else with the same breed nearby does wonders for keeping a herd healthy. They can be linebred for quite some time, but the occasional outcross seems to increase the vitality.

Will you be posting pictures of your new cages? It's about time to build some new ones here and so far I'm not sure what they're gonna look like. Seeing how other folks do things is always beneficial.
 
Aloha Haven Farm,

Sounds like you're off to a good start!

Having someone else with the same breed nearby does wonders for keeping a herd healthy. They can be linebred for quite some time, but the occasional outcross seems to increase the vitality.

Will you be posting pictures of your new cages? It's about time to build some new ones here and so far I'm not sure what they're gonna look like. Seeing how other folks do things is always beneficial.
I am using the plans from www.Raising-Rabbits.com in their PDF booklet entitled DIY Livestock Rabbit Housing. I plan to make a few variations to the PVC framework that holds the cages. So far I have built several cages but have only assembled the material for the PVC frames. Once I have the frames built, I will post photos of the building process and the finished product.
 
Back
Top