I have a wire stacker cage bank and one of the bottom cages has a 3" x 3" hole in the floor. What would be the best way to fix it? Should I try to put a whole new floor on (very difficult with it being in a bank of 6 cages) or can it be patched? If so, can anyone tell me the best way to patch? Thanks
Cage wire repair
- Thread starter sunrise
- Start date
Help Support Rabbit Talk Forum:
ottersatin
Well-known member
I suggest that you patch the hole:
With a piece of floor wire at least two inches larger than the hole you are patching.
Place the wire with the spaces running the same direction as the hole.
[J] clip the patch on all sides. This will work till the time comes to replace
all of the floors. I hope this helps to solve your dilemma.
Ottersatin.
ldtimer:
With a piece of floor wire at least two inches larger than the hole you are patching.
Place the wire with the spaces running the same direction as the hole.
[J] clip the patch on all sides. This will work till the time comes to replace
all of the floors. I hope this helps to solve your dilemma.
Ottersatin.
ldtimer:
:yeahthat: That's what I would do! Actually, the first set of hutches I bought had to all be patched so I have had a lot of practice at this point :?
I didn't have J clips at first, so I just "sewed" the patch on with some spare wire... seems to work OK so far.
