Register

New to processing pelts

Discussion of fur breeds, tanning pelts, using the furs, marketing.
User avatar
Posts: 19
Joined: October 18, 2018
Location: Ontario, Canada
Canada Female
Thanks: 1
Thanked: 0 in 0 post
BunnyBucks: 143.00

New to processing pelts

Post Number:#1  Unread postby swaggymama » Tue Oct 23, 2018 12:13 pm


I've been reading up a lot on processing pelts, and I think I want to stick with a more natural way of doing things, but I'm wondering if the steps are absolute, or if there is wiggle room.

The way I understand the process is:

-clean and cool down
-stretch / dry completely
-tan (will likely use black tea or egg white)
-dry
-tan again
-lotion
-dry

I've read about drying on racks.. and read about drying in dryers (air dry for hours with wooden blocks) but I'm confused in that can you do all drying except the first one in the dryer?

Do you HAVE to smoke the hides?

How will you know if it's dry enough?

Seriously - I've been googling / reading for like 3 hours today and I don't have a clear answer...

2 years of membership2 years of membership
User avatar
Posts: 533
Joined: July 12, 2016
Location: snohomish, wa
United States of America
Thanks: 4
Thanked: 137 in 122 posts
BunnyBucks: 2,800.00

Re: New to processing pelts

Post Number:#2  Unread postby shazza » Tue Oct 23, 2018 12:50 pm


natural "tanning" is difficult to get right - good luck! i am a tanner but i used synth tans as they are less work and more reliable, so i'm not that familiar with natural tanning. what i do know is that you HAVE to smoke the hides or it is not a true tan and will not last forever. i'm not sure about drying - it seems everyone has their own method and they stick with what works for them. this is another reason why i don't care much for natural tanning...synth tans have very clear instructions and everyone does it the same way so you can ask for help :p

the drying on racks vs dryers is because the first dry is to ensure the hair stays in well (i use salt, rather than drying,) and the second dry (in the dryer) is to dry the tanning chemicals and soften the pelt. that's what the blocks are for. you can also just soften by hand.

you'll know it's dry enough when you can stretch the skin and it has some resistance and will turn a nice white. this is a good video that shows what i mean: https://www.youtube.com/watch?v=WDd8t3TJe60 i like to take some sandpaper after they're completely stretched and dry and sand down the leather. it makes it super soft.

good luck!
Image
standard rex, harlequin, meat/fur mutts
tumblr: @babbits | facebook: @frithyeer.rabbits | ig: @frithyeerfarm

User avatar
Posts: 19
Joined: October 18, 2018
Location: Ontario, Canada
Canada Female
Thanks: 1
Thanked: 0 in 0 post
BunnyBucks: 143.00

Re: New to processing pelts

Post Number:#3  Unread postby swaggymama » Thu Oct 25, 2018 10:52 am


Thank you Shazza - I've been viewing videos of different methods etc for days... and I think I know what I want to try out, along with some 'shortcuts' such as using a blowdryer to quick dry the fur

6 years of membership6 years of membership6 years of membership6 years of membership6 years of membership6 years of membership
Posts: 2220
Joined: May 25, 2012
Location: Florida, zone 9b
Thanks: 15
Thanked: 198 in 150 posts
BunnyBucks: 13,135.00

Re: New to processing pelts

Post Number:#4  Unread postby GBov » Sat Nov 24, 2018 7:32 pm


For your first one you can try this.

After removing the hide from the rabbit, fleshing and drying it - or buying a dried hide on Etsy (movingonwiththings.etsy.com ;) - brew up a very strong brew of black tea, about 6 bags to 2 cups of water simmered for ages.

Once cool sponge it onto the hide side several times, not too much at a time, until the hide is a supple as a damp rag. Not dripping, a well wrung out dishrag dampness.

Then lay it flat on a towel, roll it up, put it on the floor and walk on it a bit. That gets any extra out.

By only wetting the hide the fur will stay dry so you are ahead of the game at that point.

Then gently pull and stretch it. This bit is all by feel and can take a few hours but sitting down with a favorite DVD helps the time to pass.

The key is GENTLE, gentle pulls and stretches.

I put hand cream on mine when the hides start to feel dryer but as I said, it is a by feel thing and you dont need to, I just like the finished profuct more.

Another thing I have found is if my hide starts to crackle or be stiff in parts I simply need to dampen that spot with a bit more of my tea and keep working it.

The end product is supposed to be soft and limp with no hard/stiff bits but the edges are always going to be stiff, that is fine, you cut them off anyway when turning your hides into beautiful things.

It is very hard to tell when the hide is done when you are starting out but the beauty of tea tanning is that you can go back to it tomorrow if it stiffens up after you think it was done.

Every hide is going to look different with natural tanning but if you think about it, it is only the fur side that most people see anyway so who cares? :lol:

Last thing, NO HEAT!!! Dryers on air only if breaking hides in them with blocks, very very important.

Learn on hides, one by one, until you are happy with what you are producing and then step it up into working several hides at the same time. Trust me, the finished hides build up, even one at a time. And keep them out of the dogs reach, my dog ate 4 months worth of work before learning that eating hides = a hiding!

__________ Sat Nov 24, 2018 7:32 pm __________

I have smoked hides and left hides unsmoked. Mostly the difference is smoked hides smell amazing. :D

One of my first hides, a mouse, is still going strong, unsmoked, 35 years and counting.

The following user would like to thank GBov for this post
michaels4gardens

Site Supporter
5 years of membership5 years of membership5 years of membership5 years of membership5 years of membership
User avatar
Posts: 2094
Joined: December 6, 2013
Location: Johnson City ,Tn.
United States of America Male
Thanks: 1031
Thanked: 568 in 443 posts
BunnyBucks: 10,379.00

Re: New to processing pelts

Post Number:#5  Unread postby michaels4gardens » Sun Nov 25, 2018 7:27 am


just a note..[ once upon a time ...i raised rabbits for a fur market] when you process rabbits for fur , .. as soon as the hide is removed, pause a minute , rinse the blood out [if any] , and lay the hide flat on a rack,...or... slide it over a "stretcher" [wire frame] and hang it up.. , or ...toss the hide into a tanning solution. If you just pile the hides until you are finished butchering a litter, or several litters, you will get places on the hides where the hair/ fur is loose and will come out easily.... this is because the hides will "heat up" when fresh and in a pile. The "Heating up" causes the fur to become "less well" attached to the hide... If you leave them piled for an hour or two in the summer, you can even get some totally bald spots... JMHO...
meat-mutt rabbits, a few laying hens.

6 years of membership6 years of membership6 years of membership6 years of membership6 years of membership6 years of membership
Posts: 2220
Joined: May 25, 2012
Location: Florida, zone 9b
Thanks: 15
Thanked: 198 in 150 posts
BunnyBucks: 13,135.00

Re: New to processing pelts

Post Number:#6  Unread postby GBov » Sun Nov 25, 2018 1:27 pm


michaels4gardens wrote:just a note..[ once upon a time ...i raised rabbits for a fur market] when you process rabbits for fur , .. as soon as the hide is removed, pause a minute , rinse the blood out [if any] , and lay the hide flat on a rack,...or... slide it over a "stretcher" [wire frame] and hang it up.. , or ...toss the hide into a tanning solution. If you just pile the hides until you are finished butchering a litter, or several litters, you will get places on the hides where the hair/ fur is loose and will come out easily.... this is because the hides will "heat up" when fresh and in a pile. The "Heating up" causes the fur to become "less well" attached to the hide... If you leave them piled for an hour or two in the summer, you can even get some totally bald spots... JMHO...


I put mine into ice water or into the fridge.

My goal is always to flesh on the same day I did the rabbit but alas :oops: my freezer once again has hides in it.

2 years of membership2 years of membership
User avatar
Posts: 533
Joined: July 12, 2016
Location: snohomish, wa
United States of America
Thanks: 4
Thanked: 137 in 122 posts
BunnyBucks: 2,800.00

Re: New to processing pelts

Post Number:#7  Unread postby shazza » Sun Nov 25, 2018 4:01 pm


i can never do more than five or six at a time before i have to go take a break, so i've never had slip issues with just piling them up. then they either go right into the salt or rolled into bags and into the freezer. even in texas summer, though i couldn't butcher during the day, so it wasn't as hot when i was working. the one time i had a team helping me we bagged the pelts and put them into a cooler with ice.
Image
standard rex, harlequin, meat/fur mutts
tumblr: @babbits | facebook: @frithyeer.rabbits | ig: @frithyeerfarm

Who is online

Users browsing this forum: No registered users and 0 guests