Processing Video.

Rabbit Talk  Forum

Help Support Rabbit Talk Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Gearmpr":17w3zvno said:
What breed rabbit were they? Sorry I new to this

Either straight New Zealand Whites......Or Californian/NZW crosses.
I've not watched it in quite a spell. Those are the only 2 breeds I have.

Pretty sure they were straight NZW's now that I think about it.

grumpy.
 
grumpy":14ttzu9p said:
Gearmpr":14ttzu9p said:
What breed rabbit were they? Sorry I new to this

Either straight New Zealand Whites......Or Californian/NZW crosses.
I've not watched it in quite a spell. Those are the only 2 breeds I have.

Pretty sure they were straight NZW's now that I think about it.

grumpy.


Ohh ok, I'm glad it's a New Zealand, I was told cali was better but a rabbit with that much yield HAS to be good
 
I just reviewed this video again...I have three to do today, all by myself for the first time...Hubby is still out of town so I get to do it . Got four more to do hopefullysoon as all are way past due. :oops: But I just wanted to say THANK YOU Grumpy. With your help I feel that I can do this alone. :D
I am just a little anxious because our dislocater is one that we made and I am not to fond of it..but ya do what ya got to do! :roll: Any way off to prepare...wish me luck everyone! :D
 
I made it!!! :D only problem was my crappie dislocater
Had to bop the last one. Had a chair leg handy. She was too large for it..slipped out and was injured. So I bopped her on the forehead..just like I learned on the forum. I feel kind of shakey but also proud..I remembered what I needed to do and did it! :)...I love you guys and I love this place....
Personal thank you to you Grumpy..you are my hero!
 
katiebear":b2y2ivjt said:
I made it!!! :D only problem was my crappie dislocater
Had to bop the last one. Had a chair leg handy. She was too large for it..slipped out and was injured. So I bopped her on the forehead..just like I learned on the forum. I feel kind of shakey but also proud..I remembered what I needed to do and did it! :)...I love you guys and I love this place....
Personal thank you to you Grumpy..you are my hero!

Thank you, young lady.

I've started using that "bop" method....
There's far less bruising around the shoulder area.
Of course, you need to be really accurate and use "just-enough" force.
There's a bit of a "knack" to it....but I really like it.

I put the loop on their hind leg and allow them to rest on my thigh.
They're pretty calm when handled this way and it allows for pin-point
accuracy. Then, it's just a quick "bap" and get on with it.

I've hurt my back several times with the "C-D" method.
Just that twist and "OOPS" there goes the back. NOT FUN.... :x
It doesn't help with the entire lower third of my spine fused together.

Glad you did okay.... :D :D :D

grumpy.
 
grumpy":3pjaeihr said:
katiebear":3pjaeihr said:
I made it!!! :D only problem was my crappie dislocater
Had to bop the last one. Had a chair leg handy. She was too large for it..slipped out and was injured. So I bopped her on the forehead..just like I learned on the forum. I feel kind of shakey but also proud..I remembered what I needed to do and did it! :)...I love you guys and I love this place....
Personal thank you to you Grumpy..you are my hero!

Thank you, young lady.

I've started using that "bop" method....
There's far less bruising around the shoulder area.
Of course, you need to be really accurate and use "just-enough" force.
There's a bit of a "knack" to it....but I really like it.

I put the loop on their hind leg and allow them to rest on my thigh.
They're pretty calm when handled this way and it allows for pin-point
accuracy. Then, it's just a quick "bap" and get on with it.

I've hurt my back several times with the "C-D" method.
Just that twist and "OOPS" there goes the back. NOT FUN.... :x
It doesn't help with the entire lower third of my spine fused together.

Glad you did okay.... :D :D :D

grumpy.
:shock: WoW I wouldn't know you had a bad back from the pictures of you in the last year...I loved the ones with the bob cat....that critter was really something. :shock:
Thank you for your encouraging words..and your video your step by step instructions were exactly what anyone new processing needs..I showed it to Joe before our first season and we even had it playing in the shop while we worked..After reviewing it again I felt like you were right there with me. :) Yeah, only one went a little haywire but I made a quick recovery.
I think I like the bop method. May do that with the next batch I am planing for Friday.
I like your idea about resting them in your lap too. a relaxed rabbit is always a good thing.
Be Blessed my friend.....
 
I've seen lots of videos on youtube and none measure up to this one. You went in to more detail then them. :thankyou:
 
Wow! I'll never process a rabbit, but I wanted to see it even though I thought I'd be grossed out. (I have issues even touching raw chicken LOL.) That was remarkably clean looking.

When I went out with some guys that hunted and watched them dress a deer, I remember it being a horrible bloody mess with organs everywhere and it just seemed like stuff was getting torn apart. Of course, I was maybe 10 years old at the time, so maybe I'm exaggerating it in my memory.

I was bracing myself to see a bunch of blood here, and shocked at how little there was. I've never seen anyone process an animal that cleanly without any organs nicked, no contamination, and every step is really logical to keep gravity working for you.

Thank you for sharing your technique!

__________ Wed Feb 11, 2015 3:08 am __________
 
wamplercathy":31sojd4a said:
I've seen lots of videos on youtube and none measure up to this one. You went in to more detail then them. :thankyou:
When we made this, it was for the expressed purpose of folks being able
to jot down notes that could be developed into a sequential list of protocols
(methodical-steps) for approval by the USDA licensing inspector. We took
our time, making sure each step was adequately explained. It worked!!
Thanks for the compliment.
Grumpy.


JenerationX":31sojd4a said:
Wow! I'll never process a rabbit, but I wanted to see it even though I thought I'd be grossed out. (I have issues even touching raw chicken LOL.) That was remarkably clean looking.

When I went out with some guys that hunted and watched them dress a deer, I remember it being a horrible bloody mess with organs everywhere and it just seemed like stuff was getting torn apart. Of course, I was maybe 10 years old at the time, so maybe I'm exaggerating it in my memory.

I was bracing myself to see a bunch of blood here, and shocked at how little there was. I've never seen anyone process an animal that cleanly without any organs nicked, no contamination, and every step is really logical to keep gravity working for you.

Thank you for sharing your technique!

__________ Wed Feb 11, 2015 3:08 am __________

I dislike "blood-splatters" as well. You'll note that once I begin, one or both
of my hands is always controlling the animal until it is expired. It's less
"emotionally-taxing" for the viewer because the flow of blood is directional
and not haphazardly flung all over the place. That alone is unnerving to
many folks.
At a normal working speed, I can process 8-10 rabbits per hour, sans the
packaging and weighing. That set of steps take about 50% of the total time
added to complete the whole thing.
Grumpy


Zinnia":31sojd4a said:
Thank you for posting this video. Very easy to follow!

I have a professional photographer and videographer who's a very close
personal friend come in and do the "shoot" for me. I told him what my
goals were and what the video was to be used for. He did an excellent job
on-site and at his home doing the editing to complete the finished product.
Keith put the polish and pinnash on the video, giving it a professional
appearance. He's developed and shot all of my novel covers. You can check
them out on my website listed below.
Thanks,
Grumpy
 
Awesome video and explanation. I can't wait to try it myself, here in the near future!! Thank you for posting!!
 
Thanks for that video, I learned a lot :)

One question: when cutting the skin leg to leg, where exactly do you cut? In front of the privy parts, or behind?

Preitler
 
Preitler":wchs4k38 said:
Thanks for that video, I learned a lot :)

One question: when cutting the skin leg to leg, where exactly do you cut? In front of the privy parts, or behind?

Preitler

Just a little in front. It's not extremely critical one way or the other.
With bucks, the line is 'lower' than with doe's.

grumpy.
 
Ncrabbit":1khk1dmk said:
Best video I have seen yet.

Thanks,

It was produced for a processor that needed it to write protocols for the USDA.
Thus far, it's been well accepted by all that have viewed it.

Grumpy.
 
New to the site and found your video to be extremely helpful. Both my husband and I watched it and plan to rewatch several times before we do out first batch. Thank you for the great video! Most helpful.
 
Back
Top