DH stayed in with the kids while I spent about 3.5 hrs doing some much needed "maintenance" for the rabbits... one of the projects I finally tackled was making hay racks for 3 of my hanging cages (the other 3 are currently vacant). I found some random scraps of wire, this being the end of the roll so the one end was badly curled. I went with it. I cut it into thirds, then curled the opposite end so that there were 2 "sides" for the hay rack. At the top those bends were 90* angles or so, and at the bottom I crimped them down the best I could with my bare hands (this was the last thing I did so I was pretty tired). I hooked the longer cut ends into the cage wire to help hold it on and then used some galvanized wire to tie the corners and middle of the bottom to the cage, and voila! Hay racks! It really didn't take all that long, just a little tedious. Still, kicking myself for not doing it sooner of course.